My code reader died and i haven't replaced it yet so dont know what code it pulled. My check engine light is on and my remote start won't.
The codes can be the reason the remote start is not working.
Remote Start Not Working Check Engine Light On. But based on what you said, if the problem happens again i will know that it is not caused by failing to tighen the cap, but by a defective cap, and i will take it to the dealer. I learned on this forum that the remote start won't work when a check engine light is on. That's usually been my problem, when remote start suddenly stops working (but my traverse is older than yours).
Put key in ignition and turn to on position push key fob to on/off positen for about 30 seconds this should reset system.adrian.,,,, posted on jun 27, 2010. If it does start it will shut down in 10. I do not want the dealer to bs me about it being the ala
Posted on november 20, 2021. It turns out that i had 2 obd codes in memory and the check engine light was off. Either way the check engine light did not go on, and the remote start still worked fine, so at this point i can't duplicate the problem.
Something, remote start worked for a second and then truck turned off. Remote start not working check engine light on. Then the check engine light can be cancelled with the scanner and i would then expect the remote start to work again.
On the newer gm vehicles that have the remote start function, if there is a check engine light related to the emissions system, or many other trouble code set in the computer system, it will disable the remote start feature. The check engine light came on. You need to diagnose the check engine light and get the cause fixed.
Neither should be in the vehicle when remote starting. I noticed a few weeks ago that the remote stop/start stopped working. I would hit the lock button then the start button twice and then the lights would flash twice.
It's going in monday to get serviced. The remote start will not work if another system is causing the lock out for the remote start to be active. Garage mate 2016 challenger scat pack shaker.
My remote start would not start car. You should have the computer scanned and tested to see why the check engine light is on. I used the idata link module for the install.
As rbarrios mentioned to, i would suspect some pending cel/engine light code, if the check engine light is on (or about to come on). If you have any codes in memory or an active light, it disables the remote start.hope that helps someone Remote start will not work if the check engine is on.
The check engine light or the hood left open will cause your remote start not to work. This is a gm safety feature. Turns out, the truck is designed not to remote start of the engine light is on.
My engine light came on a few days ago. Remote start does not work and check engine lite on. About 4 days ago the cel came on so i made the appt.
I read online (likely in this forum) that this is usually due to a 'check engine' issue however at that time there was no check engine light on my instrument panel. My 2017' has a capless fuel filler so not sure what the deal is. Just go to a stereo shop that installs remote starters and they can bypass your factory remote starter and you will just have to use your new remote starter and it doesnt care if a check engine light is on or not.
Remote start not working check engine light on by november 20, 2021 on the newer gm vehicles that have the remote start function, if there is a check engine light related to the emissions system, or many other trouble code set in the computer system, it will disable the remote start feature. Couldn't use the remote start again. Most likely the remote start isn't working because the check engine light is on.
Brought it in at 7:30a yesterday. One trucker who has had the problem before, says it is important to make sure the “check engine” light isn’t on, because the warning also disables the remote start system. The remote starting feature of the vehicle may be disabled by several reasons, among them is a current fault code recorded by the engine control module indicated by the presence of the check engine light on.
2008 qcsb 2500, g56, deleted (sold) 2011 cclb 3500, g56, 4'' tbe, sinister egr delete, efi live by anarchy (sold) Check engine light on after remote start? I am about to take it to the dealership to have them look at it.
This is the main reason why when my check engine light comes on that i get it immediately fixed. Just get yourself a code scanner and clear them. Check engine light came on during my commute home and then i noticed that the remote start doesn't work with the cel on.
On the newer gm vehicles that have the remote start function, if there is a check engine light related to the emissions system, or many other trouble code set in the computer system, it will disable the remote start feature. Check engine light on & remote start not working. Scan for fault codes and fix accordingly.
I'll just have to keep an eye one it. I am having this same issue this week with my 4 month old 2017'.